NEXALUME® is 55% Al-Zn alloy coated steel processed in Continuous Galvanizing Line, the unique coating gives the steel greater protection from the corrosion, typically used for the roll-forming process e.g : Roofing, Cladding, and other structural products.
Technical Data
Standard Reference :
AS 1397 for product & AS 1365 for dimension
Other Standard :
AS 1397, MS 1196:2000, ASTM A-792, ISO 9364, IS 15961, EN 10346:2015, TISI 2228-2259, JIS G-3321
Chemical Composition Of Steel Base
| Chemical Composition | G250 Max% | G300 G350 Max% | G450 G500 G550 Max% |
|---|---|---|---|
| Carbon - C | 0.12 | 0.30 | 0.20 |
| Manganese - Mn | 0.50 | 1.60 | 1.20 |
| Phosphorus - P | 0.040 | 0.040 | 0.040 |
| Sulfur - S | 0.035 | 0.035 | 0.03 |
Chemical Composition Of Steel Base
| Physical Properties | Range |
|---|---|
| Base Metal Thickness, mm | 0.25 - 2.50 |
| Strip width, mm | 600-1250 |
| Coating weight, gr/m2 | 150-200 |
| Steel Grade | G250, G300, G350, G450, G500, G550 |
Guaranteed Properties Of Steel
| Grade | Longitudinal Tensile Test | Transverse Band Test | |||
|---|---|---|---|---|---|
| Min Yield Strength | Min Tensile Strength | Min Elongation (Lo 50 mm) | Angle of Bend | Diameter of Mandrel in term of test piece thickness | |
| Mpa | Mpa | % | t | degrees | |
| G250 | 250 | 320 | 25 | 180 | 0 |
| G300 | 300 | 340 | 20 | 180 | t |
| G350 | 350 | 420 | 15 | 180 | 2t |
| G450 | 450 | 480 | 10 | 90 | 4t |
| G500 | 500 | 520 | 8 | 90 | 6t |
| G550 | 550 | 550 | 2 | - | - |
Other grade available upon request
Note :
- Tensile tested in longitudinal rolling direction, bending tested in transverse rolling direction.
- Yield Strength & Tensile Strength guaranteed for thickness > 0.40 mm, Elongation guranteed for thickness > 0.60 mm.
Dimension Tolerance & Capabilities
Thickness Tolerance
| Base Metal Thickness | Nominal Width < 1000 mm | Nominal Width 1000 to 1219 mm |
|---|---|---|
| 0.25 ≤ T ≤ 0.30 | ± 0.02 | ± 0.02 |
| 0.30 < T ≤ 0.50 | ± 0.03 | ± 0.04 |
| 0.50 < T ≤ 0.80 | ± 0.04 | ± 0.05 |
| 0.80 < T ≤ 1.20 | ± 0.05 | ± 0.06 |
| 1.20 < T ≤ 1.60 | ± 0.06 | ± 0.07 |
| 1.60 < T ≤ 2.00 | ± 0.07 | ± 0.08 |
| 2.00 < T ≤ 2.50 | ± 0.08 | ± 0.09 |
Width Tolerance
| Edge type | Width (W) mm | Tolerance Minus mm | Tolerance Plus mm |
|---|---|---|---|
| Mill Edge | W < 1000 | 0 | 4 |
| 1000 ≤ W ≤ 1250 | 0 | 5 | |
| Slitted Edge | 30 ≤ W ≤ 150 | 0 | 0.40 |
| 150 < W ≤ 300 | 0 | 0.60 | |
| 300 < W ≤ 450 | 0 | 0.80 | |
| 450 ≤ W ≤ 600 | 0 | 1.00 | |
| 600 < W ≤ 750 | 0 | 1.00 |
Standard product is 914 mm, 1100 mm & 1219 mm, other sizes may be available upon request
TATALUME® is 55% Al-Zn alloy coated steel processed in Continuous Galvanizing Line, the unique coating gives the steel greater protection from the corrosion, typically used for the roll-forming process e.g : Roofing, Cladding, and other structural products.
Technical Data
Standard Reference :
SNI 4096 - 2007 BjLAS
Other Standard :
AS 1397, MS 1196:2000, ASTM A-792, ISO 9364, IS 15961, EN 10346:2015, TISI 2228-2259, JIS G-3321
Chemical Composition Of Steel Base
| Chemical Composition | G250 Max% | G300 Max% | G550 Max% |
|---|---|---|---|
| Carbon - C | 0.12 | 0.30 | 0.20 |
| Manganese - Mn | 0.50 | 1.60 | 1.20 |
| Phosphorus - P | 0.040 | 0.040 | 0.040 |
| Sulfur - S | 0.035 | 0.035 | 0.040 |
Chemical Composition Of Steel Base
| Physical Properties | Range |
|---|---|
| Base Metal Thickness, mm | 0.25 - 2.50 |
| Strip width, mm | 600-1250 |
| Coating weight, gr/m2 | 50 - 100 - 150 - 200 |
| Steel Grade | G300, G550, & Others |
Guaranteed Properties Of Steel
| Grade | Longitudinal Tensile Test | Transverse Band Test | |||
|---|---|---|---|---|---|
| Min Yield Strength | Min Tensile Strength | Min Elongation (Lo 50 mm) | Angle of Bend | Diameter of Mandrel in term of test piece thickness | |
| Mpa | Mpa | % | t | degrees | |
| G300 | 300 | 340 | 20 | 180 | 1t |
| G550 | 550 | 550 | 2 | - | - |
Other grade available upon request
Note :
- Tensile tested in longitudinal rolling direction, bending tested in transverse rolling direction.
- Yield Strength & Tensile Strength guaranteed for thickness > 0.40 mm, Elongation guranteed for thickness > 0.60 mm.
Dimension Tolerance & Capabilities
Thickness Tolerance
| Base Metal Thickness | Nominal Width < 1000 mm | Nominal Width 1000 to 1219 mm |
|---|---|---|
| 0.25 ≤ T ≤ 0.30 | ± 0.02 | ± 0.02 |
| 0.30 < T ≤ 0.50 | ± 0.03 | ± 0.04 |
| 0.50 < T ≤ 0.80 | ± 0.04 | ± 0.05 |
| 0.80 < T ≤ 1.20 | ± 0.05 | ± 0.06 |
| 1.20 < T ≤ 1.60 | ± 0.06 | ± 0.07 |
| 1.60 < T ≤ 2.00 | ± 0.07 | ± 0.08 |
| 2.00 < T ≤ 2.50 | ± 0.08 | ± 0.09 |
Width Tolerance
| Edge type | Width (W) mm | Tolerance Minus mm | Tolerance Plus mm |
|---|---|---|---|
| Mill Edge | W < 1000 | 0 | 5 |
| 1000 ≤ W ≤ 1219 | 0 | 7 | |
| Slitted Edge | 30 ≤ W ≤ 150 | 0 | 0.40 |
| 150 < W ≤ 300 | 0 | 0.60 | |
| 300 < W ≤ 450 | 0 | 0.80 | |
| 450 < W ≤ 600 | 0 | 1.00 | |
| 600 < W ≤ 750 | 0 | 1.00 |
Standard product is 914 mm, 1100 mm & 1219 mm, other sizes may be available upon request
NEXIUM® is a product of Zinc coated steel plate through continuous hot dipping process previously passed through the annealing process (furnace) which can be set to enerate minimum tensile strength 270 Mpa up to 570 Mpa with coating thickness from 80 (Z08) to 600 (Z60) gram/m2.
Nexium is processed by Continuous Galvanizing Line equipped with NOF (Non-Oxidizing Furnace) technology so that in can produce high quality coated steel products for use roll forming industry, roofing, cladding and other structural materials.
Equipped with a Skinpass Mill for further painting process, and using surface treatment coating (Anti Finger Print) or Passivation in order to have a smooth surface quality and resistant to finger print.
Technical Data
Standard Reference :
AS 1397 for product & AS 1365 for dimension
Other Standard :
JIS G-3302, ASTM A 653/A 653M, AS 1397, etc
Chemical Composition Of Steel Base
| Chemical Composition | G250 Max% | G300 G350 Max% | G450 G500 G550 Max% |
|---|---|---|---|
| Carbon - C | 0.12 | 0.30 | 0.20 |
| Manganese - Mn | 0.50 | 1.60 | 1.20 |
| Phosphorus - P | 0.040 | 0.040 | 0.040 |
| Sulfur - S | 0.035 | 0.035 | 0.03 |
Chemical Composition Of Steel Base
| Physical Properties | Range |
|---|---|
| Base Metal Thickness, mm | 0.25 - 2.50 |
| Strip width, mm | 600-1250 |
| Coating weight, gr/m2 | 100-600 |
| Steel Grade | G250, G300, G350, G450, G500, G550 |
Guaranteed Properties Of Steel
| Grade | Longitudinal Tensile Test | Transverse Band Test | |||
|---|---|---|---|---|---|
| Min Yield Strength | Min Tensile Strength | Min Elongation (Lo 50 mm) | Angle of Bend | Diameter of Mandrel in term of test piece thickness | |
| Mpa | Mpa | % | t | degrees | |
| G250 | 250 | 320 | 25 | 180 | 0 |
| G300 | 300 | 340 | 20 | 180 | t |
| G350 | 350 | 420 | 15 | 180 | 2t |
| G450 | 450 | 480 | 10 | 90 | 4t |
| G500 | 500 | 520 | 8 | 90 | 6t |
| G550 | 550 | 550 | 2 | - | - |
Other grade available upon request
Note :
- Tensile tested in longitudinal rolling direction, bending tested in transverse rolling direction.
- Yield Strength & Tensile Strength guaranteed for thickness > 0.40 mm, Elongation guranteed for thickness > 0.60 mm.
Dimension Tolerance & Capabilities
Thickness Tolerance
| Base Metal Thickness | Nominal Width < 1000 mm | Nominal Width 1000 to 1219 mm |
|---|---|---|
| 0.25 ≤ T ≤ 0.30 | ± 0.02 | ± 0.02 |
| 0.30 < T ≤ 0.50 | ± 0.03 | ± 0.04 |
| 0.50 < T ≤ 0.80 | ± 0.04 | ± 0.05 |
| 0.80 < T ≤ 1.20 | ± 0.05 | ± 0.06 |
| 1.20 < T ≤ 1.60 | ± 0.06 | ± 0.07 |
| 1.60 < T ≤ 2.00 | ± 0.07 | ± 0.08 |
| 2.00 < T ≤ 2.50 | ± 0.08 | ± 0.09 |
Width Tolerance
| Edge type | Width (W) mm | Tolerance Minus mm | Tolerance Plus mm |
|---|---|---|---|
| Mill Edge | W < 1000 | 0 | 4 |
| 1000 ≤ W ≤ 1250 | 0 | 5 | |
| Slitted Edge | 30 ≤ W ≤ 150 | 0 | 0.40 |
| 150 < W ≤ 300 | 0 | 0.60 | |
| 300 < W ≤ 450 | 0 | 0.80 | |
| 450 ≤ W ≤ 600 | 0 | 1.00 | |
| 600 < W ≤ 750 | 0 | 1.00 |
Standard product is 914 mm, 1100 mm & 1219 mm, other sizes may be available upon request
Nexcolor® is a trademark of pre-painted 55% aluminium zinc coated steel and pre-painted zinc coated steel produced by Tata Metal Lestari which provides certain properties and also aesthetics to the steel base substrate. Available on Nexalume® or Nexium® substrates with varying metal layer mass and steel grade. Many colors with different gloss levels, varying film thicknesses are an ideal choice for interiors and exteriors with many applications.
Standard Product Testing: AS/NZS 2728
Dry Film Thickness Measurements
Color Measurements (Visual & Instrument)
Solvent Resistant Test
Gloss Measurements
Pencil Hardness
Reverse Impact
T-Bend
General Description
Coating Class
: Nexalume AZ150 - AZ200
: Nexium Z275
Grade
: G300 | G550
Base Metal Thickness
: 0.20 - 0.80
Width
: ≤ 1250 mm
COATING TECHNOLOGY
